DUOCEL 118/119 are cure & seal water based compounds based on acrylic copolymer, specifically formulated to penetrate and seal effectively freshly finished concrete to retard water loss during the curing process.
DUOCEL 421 is a penetrating primer-sealer for concrete and wood surfaces. It effectively penetrates the substrate to form a tightly adherent tough and flexible surface seal which may be used alone or overcoated.
DUOCHEM 377 is an extremely flexible polyurethane primer. Formulated with 93% reactive materials, it is ideal as an underlayment before the application of DUOCHEM flexible systems.
DUOCHEM 387 is a high quality, 100% reactive polyurethane waterproofing membrane, especially designed for vertical application on walls in areas such as secondary containment, laundry rooms, paper storage rooms, etc.
DUOCHEM 389 is a high quality flexible polyurethane primer, formulated with 100% reactive materials. Ideal for use on porous or rough surfaces prior to the application of Duochem flexible system products such as Duochem 387, 388, 390 or Resoflex.
DUOCHEM 390 is a high quality, 100% reactive polyurethane membrane. This two component material cures at room temperature to offer a tough elastomeric waterproofing membrane for use between concrete slabs or under Duochem special floor toppings.
DUOCHEM 5205 is a waters clear, 100% solids epoxy coating, designed as a protective coating and highly recommended for use as a topcoat on decorative surfaces to keep original appearance and look.
DUOCHEM 5206 is a clear, high solids satin or anti-slip finish epoxy coating, designed as a protective coating and highly recommended for use as a top coat on decorative surfaces to keep original appearance and look.
DUOCHEM 5230 is a clear, 100% solids epoxy coating, designed as a protective coating and highly recommended for use as a topcoat on concrete surfaces to dust proof, protect against deterioration and create wet look appearance.
DUOCHEM 556 is a two-component liquid base epoxy with excellent bonding qualities. Will bond freshly mixed concrete, mortars and toppings (cementitious, epoxy or polymers) to existing concrete or other similar sound materials.
DUOCHEM 571 is a two-component liquid 100% solids epoxy bonding agent used to bond freshly mixed concrete and mortars (cementitious, epoxy and polymer) to existing concrete.
DUOCHEM 595 is a 95% solids, two-component grey epoxy surfacer, formulated to provide an economical method to level or fill irregular surfaces prior to the installation of floor coatings or topping systems.
DUOCHEM 6010 is a water base epoxy binder formulated to be filled with graded aggregates and Portland cement to form a high quality mortar suitable for patching and leveling concrete substrates after concrete replacement.
DUOCHEM 6032/6035 are a two-component, clear water base satin (6032) or mat (6035) epoxy coatings. Ideal as finish or refresher coats on epoxy quartz and terrazzo floors.
DUOCHEM 8116 is a light and smooth 100% solids grey epoxy surfacer, specially formulated to fill and level Schluter-Ditra prior to the installation of a terrazzo matrix.
DUOCHEM 9400 is used as a silica sand filled binder to trowel a flooring system of a thickness varying from 0.4 to 6 mm (0.05" to 1/4"), depending on requirements.
DUOCHEM 9450 is a 100% solids, two component epoxy coating, designed as a protective coating for vertical and horizontal surfaces and recommended as a topcoat on new or existing epoxy toppings and on most hard sound surfaces.
DUOCHEM 9700 is 100% solids by volume, two-component fast setting epoxy binder. When blended with selected aggregates, it produces an easy to trowel flooring system with excellent durability.
DUOCHEM 9TZ additive is used in an epoxy binder with aggregates to facilitate vertical installation of flooring systems to form integrally coved bases.
DUOCHEM ALOX is aluminum oxide texturing agent that is readily dispersable in selected coatings to produce textures non-slip finish, while considerably improving abrasion and scratch resistance.
DUOCHEM EE Blockfiller is a two-component, aqueous epoxy resin based system, recommended for interior and exterior use on masonry, concrete, concrete blocks and other porous surfaces.
DUOCHEM LR is a two-component 100% solids by volume system specifically designed to be used with Duochem F.R. Mesh fiberglass cloth to reinforce walls surfaces
DUOCLAD 22 is a three-component system made of epoxy resins, hardener and selected aggregates which can be used as a heavy duty floor topping or as a patching compound for areas where resistance to heavy traffic or chemical spillage is required.
Sectors : Bakeries, Breweries, Chemical Processing, Dairies, Food & Brevage, Heavy industry, Kitchens, Meat Processing, Metal industry, Pulp & Paper, Secondary containment
DUOCRETE is a blend of Portland cement and fine aggregates that is mixed with water to create self-levelling liquid concrete that hardens rapidly to a smooth and uniform level surface.
DUOFILL is a conveniently pre-packaged three-component compound, consisting of water base epoxy resin and hardener, and a dry pre-mixed blend of Portland cement and graded silica aggregates.
DUROPLAST 150 is a two-component water base epoxy coating, available in various finishes ranging from mat to gloss. It hardens to a hard and very tough film. Ideal for interior use on walls.
DUROPLAST 305 is a water base, clear flexible urethane acrylic glaze coat / sealer, specifically formulated to restore and protect concrete, terrazzo, masonry or wood.
DUROPLAST 401 is a conveniently pre-packaged two component compound, consisting of acrylic resin and a dry, pre-mixed blend of Portland cement and graded silica aggregates.
DUROPLAST 500 UV is an aqueous acrylic urethane clear lacquer formulated to protect sensitive surfaces such as epoxy base coating and sealers for flooring systems (quartz and terrazzo).
DUROPLI joint filler is a two-component self-levelling caulking and sealing compound used for filling horizontal joints subject to structural movement or expansion and contraction as a result of temperature changes.
DUROPLI Vertical grade is a two-component self-levelling caulking and sealing compound used for filling vertical joints subject to structural movement or expansion and contraction as a result of temperature changes.
FIBERFLEX is a fibreglass filled urethane compound specially designed as a detail coat material where a flexible fibreglass reinforced crack bridging material is required.
POXYCRETE is a two-component aqueous epoxy "concrete" filled with fine aggregates and formulated to provide a self-levelling mix that hardens at room temperature to form a semi-permeable surface.
SEPTIFLEX is a 100% solids elastomeric polyurethane wall system. This system consists of Duochem 387 and 388 and is designed for interior walls where a flexible system is required for increased impact resistance and crack bridging properties.
URECLAD Flowable is a slurry applied system, providing a seamless durable floor topping, recommended for industries such as food and beverage, pulp and paper, waste and water treatment and chemicals plants.
URECLAD Trowel is a single coat trowel applied system providing a seamless and durable floor topping, recommended for industries such as food and beverage, pulp and paper, waste and water treatment and chemicals plants.
URECLAD Vertical is composed of a two component water based polyurethane binder and a special aggregate blend. When combined, a high quality mortar is produced that can be applied at a thickness of 4.5 mm (3/16") for vertical applications such as cove bas
